Elenco Snap Circuits Motion Detector &reg User Manual download pdf

The Snap Circuits Kit uses electronic blocks that snap onto a clear plastic base grid to build different

circuits. These blocks have different colors and numbers on them so that you can easily identify them.

Build the circuit shown by placing all the parts with a black 1 next to them on the clear plastic base grid

first.

Then, assemble parts marked with a 2, then the par

ts marked with a 3, and finally

, the part marked

with a 4. Install a 9V alkaline battery (not included) into the battery holder (B5). Place the base grid

into the blue stand (with the speaker closest to the stand) and carefully stand it up, facing across a room.

Turn on the switch (on B5). You hear an alarm sound for a few seconds on start-up and then whenever

the circuit detects motion in the room.

Build the circuit shown here and turn on the switch. It makes a siren

sound like a police car.

If you have any problems, contact Elenco

(800) 533-2441 Fax: (847) 520-0085 • e-mail: [email protected] • Web site: www.elenco.com or www.snapcircuits.net

PPrroojjeecctt ##11 MMoottiioonn DDeetteeccttoorr

PPrroojjeecctt ##44

Police Car

WARNING: SHOCK HAZARD -

ever connect Snap Circuits

to the electrical outlets in your

home in any way!

WARNING: Always check your wiring before

turning on a circuit. Never leave a circuit

unattended while the batteries are installed.

Never connect additional batteries or any other

power sources to your circuits.

Motion Detector

Model SCP-03

753142

Use the circuit from project #1. Remove the 2-

snap wire at point C, but keep it connected at

point B. The circuit works the same way, but

sounds like a siren.

Siren Motion Detector

Use the circuit from project #1. Remove the 2-

snap wire from points B and C and connect it

across points A and B. Now the circuit sounds

like an alarm.

Alarm Motion Detector

Use the circuit from project #4, but add a 2-snap wire across points A

and B. Now it sounds like a fire engine.

PPrroojjeecctt ##55

Fire Engine

Use the circuit from project #4, but add a 2-snap wire across points B

and C. Now it sounds like a machine gun.

PPrroojjeecctt ##66

Machine Gun

Use the circuit from project #4, but add a 2-snap wire across points A

and D. Now it sounds like a European siren.

PPrroojjeecctt ##77

European Siren

1 2

Summary of Contents

Page 1 - Motion Detector

The Snap Circuits Kit uses electronic blocks that snap onto a clear plastic base grid to build differentcircuits. These blocks have different colors a

Page 2 - PARTS LIST

BATTERIES:Use only 9V alkaline type (not included).Insert battery with correct polarity. Non-rechargeable batteries should not berecharged. Rechargeab

Comments to this Manuals

No comments

Elenco Snap Circuits Motion Detector &reg User Manual

Browse online or download User Manual for Toys Elenco Snap Circuits Motion Detector &reg. Elenco Snap Circuits Motion Detector &reg User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Toys Elenco Snap Circuits Motion Detector &reg