Elenco Snap Circuits Musical Recorder &reg User Manual download pdf

The Snap Circuits Kit uses electronic blocks that snap onto a clear plastic base grid to build

different circuits. These blocks have different colors and numbers on them so that you can

easily identify them.

Build the circuit shown by placing all the parts with a black 1 next to them

on the clear plastic base grid first. Then, assemble parts marked with a 2, and finally parts

marked with a 3. Install three (3) “AA” batteries (not included) into the battery holder (B3).

Turn on the slide switch (S1), you hear a beep signaling that you may begin recording. Talk

into the microphone (X1) up to 8 seconds, and then turn off the switch (it also beeps after the

8 seconds expire).

Press the press switch (S2) for playback. It plays the recording you made followed by one of

three songs. If you press the press switch before the song is over, the music will stop. You may

press the press switch several times to play all three songs.

You can erase the recording you made by removing the

microphone (X1) from project #1. Turn on the slide switch

(S1), you hear a beep signaling that the IC begins recording,

then turn it off. The previous recording is now erased. Press

the press switch (S2) for playback and there should be no

recording before the music starts.

If y

ou ha

ve an

y pr

lems,

contact Elenco

(800) 533-2441 Fax: (847) 520-0085 • e-mail: elenco@elenco.com • Web site: www.elenco.com or www.snapcircuits.net

PPrroojjeecctt ##11 MMuussiiccaall RReeccoorrddeerr

PPrroojjeecctt ##22

Eraser

Modify the circuit shown by removing the microphone (X1)

and the slide switch (S1). Press the press switch (S2) to

start the first song. When the music stops, press the press

switch again to hear the second song. When the second

song stops, press the press switch again to hear the third

song. If you press the press switch before the song is over

the music will stop.

PPrroojjeecctt ##33

Playing Music

Modify the circuit in project #3 by replacing the 3-snap

across points A & B with the microphone (X1). Press the

press switch (S2) for playback and the music is not as loud.

PPrroojjeecctt ##44

Loudness Control

WARNING: SHOCK HAZARD -

Never connect Snap Circuits

to the electrical outlets in your

home in an

y way!

WARNING: Always check your wiring before

turning on a circuit. Never leave a circuit

unattended while the batteries are installed.

Never connect additional batteries or any other

power sources to your circuits.

Musical Recorder

Model SCP-01

Note

753140

1 2

Summary of Contents

Page 1 - Musical Recorder

The Snap Circuits Kit uses electronic blocks that snap onto a clear plastic base grid to builddifferent circuits. These blocks have different colors a

Page 2 - PARTS LIST

BATTERIES:Use only 1.5V AA type (not included).Insert batteries with correct polarity.Non-rechargeable batteries should notbe recharged. Rechargeable

Comments to this Manuals

No comments

Elenco Snap Circuits Musical Recorder &reg User Manual

Browse online or download User Manual for Toys Elenco Snap Circuits Musical Recorder &reg. Elenco Snap Circuits Musical Recorder &reg User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Toys Elenco Snap Circuits Musical Recorder &reg