Elenco LED Fun User Manual download pdf

If you have any problems, contact Elenco

(800) 533-2441 Fax: (847) 520-0085 ● e-mail: [email protected] ● Website: www.elenco.com or www.snapcircuits.net

ARNING: SHOCK HAZARD -

Never connect Snap Circuits

to the electrical outlets in your

ome in any way!

WARNING: Always check your wiring before

urning on a circuit. Never leave a circuit

unattended while the batteries are installed.

ever connect additional batteries or any other

power sources to your circuits.

LED Fun

Model SCP-11

753160

Snap Circuits

uses electronic blocks that snap onto a

base grid to build different circuits. These blocks have

different colors and numbers on them so that you can

easily identify them. Build the circuit shown by placing all

the parts with a black 1 next to them on the clear base

grid first. Then, assemble parts marked with a 2. Install

two (2) “AA” batteries (not included) into each of the

battery holders (B1). Lay the mounting base on any LED

(D1, D6, D8, or D9) and place the fiber optic tree in it.

Turn on the slide switch (S1). Move the lever on the

adjustable resistor (RV2) around to change the

brightness of the LEDs. The blue & color LEDs will be

blinking. For best effects, place the circuit in a dimly lit

room. Also, try swapping the the LEDs with each other.

Project 1 Light Slider

Placement

Level Numbers

Build the circuit as shown, and turn on the

slide switch (S1). The color LED (D8) is

changing colors in a repeating pattern. If

desired, place the fiber optic tree and

mounting base on the color LED. For best

effects, place the circuit in a dimly lit room.

Next, replace the color LED (D8) with the red,

white, or blue LEDs (D1, D6, & D9).

CAUTION: High intensity light. Do not look

irectly at the white or blue LEDs (D6 & D9).

Project 2 Color Light

Place fiber optic

tree & mounting

ase on any LED

f desired, place

fiber optic tree

mounting base

on color LED

Project 3 Spectrum of Light

Use the circuit from project 2, but look at each of

the LEDs through the prismatic film. Prismatic

film is the approximately 1.5” x 1” plastic sheet

that is included in this kit. The white LED will give

the most impressive effects. Next, view different

light sources in and around your home through

the prismatic film.

Prismatic film

This circuit is pictured

on the front of the box,

use that picture to help

in building it.

The batteries (B1) push electricity

through the circuit. The switch

(S1) turns the electricity on or off.

Resistors (like R1) limit and

control the flow of electricity.

LEDs are light emitting diodes,

which convert electrical energy

into light; the color of the light

emitted depends on the

characteristics of the material

used in them. LEDs are more

energy efficient than normal light

bulbs. The color LED contains

red, green, and blue LEDs, with a

micro-circuit controlling them.

Prismatic film sep-

arates light into

different colors, and

can make interesting

light effects. White

light is a combination

of all colors.

SCP-11_021914.qxp_SCP-11_Instructions 3/7/14 10:40 AM Page 1

1 2 3 4

Summary of Contents

Page 1 - Project 1 Light Slider

Page 2 - Adjustable Row of Lights

Project 7 Blinking ColorsLeave the swtich (S1) off at first; the white and colorLEDs (D6 & D8) are blinking. Now turn on the switch;the

Page 3 - Adjustable Double Light

Turn on the switch (S1). The red & blue LEDs (D1 & D9) will beon. Try replacing either or both of them with the white and colorLEDs (D6 &

Page 4 - OTHER SNAP CIRCUITS

Important: If any parts are missing ordamaged, DO NOT RETURN TORETAILER. Call toll-free (800) 533-2441 ore-mail us at: [email protected]

Comments to this Manuals

No comments

Elenco LED Fun User Manual

Browse online or download User Manual for Toys Elenco LED Fun. Elenco LED Fun User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Toys Elenco LED Fun