ELECTRONIC ROULETTE KITMODEL AK-300Instruction & Assembly ManualCopyright © 2005, 1997 by Elenco®Electronics, Inc.All rights reserved. Revised 200
R15 - 20kΩ 5% 1/4W Resistor(red-black-orange-gold)R17 - 56kΩ 5% 1/4W Resistor(green-blue-orange-gold)D42 - 1N4148 Diode(see Figure E)R24 - 270kΩ 5% 1/
-10-COMPONENT CHECKMake sure that all components have beenmounted in their correct places.Make sure that the LED’s have been installedcorrectly. The f
PROBABILITYIf among (F+U) equi-probable and mutually exclusiveevents, F is regarded as favorable and U asunfavorable, then for a single event, the pro
-12-RULES FOR PLAYING ROULETTEThe object of the game is to increase the value ofyour chips more than any other player. Chips withgold centers are wort
-13-WORD GLOSSARYCapacitor An electrical component that canstore electrical pressure (voltage)for periods of time.Cold Solder Joint Occurs because ins
-14-Space War GunK-10Rapid fire or single shot with 2flashing LED’s.0-15V Power SupplyK-11Alow-cost way to supply voltageto electronic games, etc.0-15
Elenco®Electronics, Inc.150 Carpenter AvenueWheeling, IL 60090(847) 541-3800Web site: www.elenco.come-mail: [email protected]. In electronics, a
Qty.Symbol Description Part #1 PC Board 5171001 S1 Push Button Switch 5401011BT Battery Holder 9V 5900961 BZ1 Buzzer Piezoelectric 5952014 Plastic Spa
IDENTIFYING RESISTOR VALUESUse the following information as a guide in properly identifying the value of resistors.BAND 11st DigitColor DigitBlack 0Br
-3-INTRODUCTIONElectronic Roulette (roo-let) replaces the ivory ballwith a circuit of flashing light emitting diodes (LED’s).Red LED’s are arranged in
-4-Assume that part of the sand from the “Timer Glass” inFigure 2 is poured into a bucket as shown in Figure 3a.When the bucket has enough sand, it wi
THE SOUND CIRCUITIn the sound generator circuit, a 500Hz oscillator isalways running. This oscillator is represented by thespinning wheel in Figure 4a
-6-IntroductionThe most important factor in assembling your AK-300 Electronic Roulette Kit is good soldering techniques.Using the proper soldering iro
Figure BMount the IC socket onto the PC boardwith the notch in the same direction asmarked on the PC board. Then, mountthe IC onto the socket with the
-8-C1 - .02µF or .022µF(203 or 223) DiscapR12 - 2.2MΩ 5% 1/4W Resistor(red-red-green-gold)R9 - 10kΩ 5% 1/4W Resistor(brown-black-orange-gold)R13 - 47k
Comments to this Manuals