Elenco 3 1/2 Digit Cap./ Trans./ Freq User Manual download pdf

(9) Data Hold

Press the “D.HOLD” button on the meter to enter the data hold mode and press this

button again and the meter exits the data hold mode.

(10) Auto Power Off and Disable

1. When the meter has been turned on for 15 minutes without any action from the users,

the meter will automatically turn itself off.

2. To disable the Auto Power Off function, press any button when the meter is on or

switch the selector switch.

4. Care and Maintenance

4-1. Caring for Your Multimeter

Your digital multimeter is an example of superior design and craftsmanship. The following

suggestions will help you care for the multimeter so you can enjoy it for years.

1. Keep the multimeter dry. If it gets wet, wipe it dry immediately. Liquids can contain

minerals that can corrode electronic circuits.

2. Use and store the multimeter only in normal temperature environments. Extreme

temperatures can shorted the life of electronic devices, damage batteries, and distort

or melt plastic parts.

3. Handle the multimeter gently and carefully. Dropping it can damage the circuit boards

and case and can cause the multimeter to work improperly although the holster can

provide enough protection.

4. Keep the multimeter away from dust and dirt, which can cause premature wear of

parts.

5. Wipe the multimeter with a damp cloth occasionally to keep it looking new. Do not

use harsh chemicals, cleaning solvents, or strong detergents to clean the multimeter.

6. Use only fresh batteries of the required size and type. Always remove old or weak

batteries. They can leak chemicals that destroy electronic circuits.

4-2. Maintenance

9V Battery Replacement

1. Make sure that the instrument is not connected to any external circuit. Set the

selector switch to the OFF position and remove the test leads from the terminals.

2. Remove the screws from the bottom case and lift the case. Remove the spent battery

and replace it with a battery of the same type.

Fuse Replacement

Remove the screws from the bottom case and lift the case. Replace the fuse with the

same type and rating: 5 x 20mm 0.5A/250V fast-blow fuse or 5 x 20mm 10A/250V

fast-blow fuse as the replacements.

Elenco

Electronics, Inc.

150 W. Carpenter Avenue

Wheeling, IL 60090

(847) 541-3800

http://www.elenco.com

e-mail: [email protected]

OPERATOR’S

INSTRUCTION MANUAL

M-2795

DIGITAL MULTIMETER

Electronics, Inc.

1 2 3 4

Summary of Contents

Page 1 - DIGITAL MULTIMETER

(9) Data HoldPress the “D.HOLD” button on the meter to enter the data hold mode and press thisbutton again and the meter exits the data hold mode.(10)

Page 2 - ! WARNING !

1. Safety InformationTo ensure that the meter is used safely, follow all of the safety and operationinstructions in this manual. If the meter is not

Page 3 - 3. Operation

3. OperationWARNING1. When measuring voltage, be sure that the instrument is not connected or switched tothe resistance range. Always ensure that the

Page 4 - 2. Specifications

2. Specifications2-1. General SpecificationsDisplay 3 3/4 digit LCD with a max. reading of 4000.Range Control Manual range control.Polarity Automatic

Comments to this Manuals

No comments

Elenco 3 1/2 Digit Cap./ Trans./ Freq User Manual

Browse online or download User Manual for Measuring instruments Elenco 3 1/2 Digit Cap./ Trans./ Freq. Elenco 3 1/2 Digit Cap./ Trans./ Freq User Manual

Summary of Contents

Comments to this Manuals

Related products and manuals for Measuring instruments Elenco 3 1/2 Digit Cap./ Trans./ Freq